Equipment photo on request
CNC lathes
WEISS WL300CNC — CNC lathe
- Swing over bed
- 300 mm
- Swing over cross slide
- 160 mm
- Processing length (max.)
- 750 mm
- Spindle bore
- 38 mm
Availability on request
Availability on request
- Swing over bed
- 1500 mm
- Swing over carriage
- 1100 mm
- Distance between centers
- 3000–10000 mm
- Guideway width
- 1100 mm
| Swing over bed | 1500 mm |
|---|---|
| Swing over carriage | 1100 mm |
| Distance between centers | 3000–10000 mm |
| Guideway width | 1100 mm |
| Max load capacity | 10 T |
| Spindle bore | 100 mm |
| Spindle taper | Metric taper 120 |
| Spindle nose / taper | 1:30 extended spindle |
| Spindle speed | 10–300 rpm |
| Chuck size | 1250 mm, 4-jaw, manual |
| Turret stations | NC turret, 4 positions |
| Maximum tool size | 50×50 mm |
| X-axis travel | 850 mm |
| Z-axis travel | 2850–9850 mm |
| X-axis rapid traverse | 4000 mm/min |
| Z-axis rapid traverse | 6000 mm/min |
| Tailstock quill diameter | Φ260 mm |
| Tailstock quill taper | Metric taper 80 |
| Tailstock quill travel | 300 mm |
| Motor power | 30 kW |
| Coolant pump motor | 0.37 kW |
| Width×Height | 2700×2560 mm |
| Length | 6700–13700 mm |
| Net weight | 24.6–30.9 T |
In the same category
Documentation
Request the manufacturer catalog, installation drawing and confirmed specification with your quotation.
Equipment photo on request
CNC lathes
WEISS WL210CNC — CNC lathe
- Swing over bed
- 210 mm
- Swing over cross slide
- 130 mm
- Processing length (max.)
- 400 mm
- Spindle bore
- 21 mm
Availability on request
Equipment photo on request
CNC lathes
WEISS WL250CNC — CNC lathe
- Swing over bed
- 250 mm
- Swing over cross slide
- 140 mm
- Processing length (max.)
- 550 mm
- Spindle bore
- 26 mm
Availability on request
Equipment request
Start with your task.
Describe the product and expected result. Leave unknown parameters blank; we will clarify them together.
- WHITE EAGLE CK61160L