Combination machines
WEISS MPV290F — Combination machine with movable milling head
- Distance between centres
- 750 mm
- Swing over bed
- 290 mm
- Swing over cross slide
- 170 mm
- Spindle taper
- MT5
Availability on request
Equipment photo on request
Availability on request
- Swing over bed
- 300 mm
- Distance between centers
- 500/750 mm
- Swing over cross slide
- 140 mm
- Spindle bore
- 26 mm
| Swing over bed | 300 mm |
|---|---|
| Distance between centers | 500/750 mm |
| Swing over cross slide | 140 mm |
| Spindle bore | 26 mm |
| Taper of spindle bore | M.T.4# |
| Cross stroke | 200 mm |
| Longitudinal stroke | 80 mm |
| Metric threads available | 14 |
| Inch threads available | 20 |
| Metric pitch/grade | 0.5–3mm |
| Inch pitch/grade | 11–40 threads per inch |
| Tailstock quill travel | 50 mm |
| Taper of tailstock quill | M.T.3# |
| Step of spindle speed | 6 |
| Spindle speed | 160–1600r/min rpm |
| Spindle to table | 240–320 mm |
| Spindle center to column | 175 mm |
| Heads tilt left & right | 360° |
| Step of milling spindle speed | 12 |
| Milling spindle speed | 125–1600r/min rpm |
| Milling-drilling box stroke | 80 mm |
| Table width | 150 mm |
| Table Length | 425 mm |
| T-slot | 12 mm |
| Milling-drilling shaft stroke | 80 mm |
| Cross travel (mill) | 40 mm |
| Milling-drilling spindle taper | M.T.3# |
| Net / gross weight | 200kg (net, without base) |
| Overall dimensions | 110(137)×55×74cm |
| Base net weight | 75 kg |
| Base dimensions | 105×50×72 cm |
| Power of motor | 550w 220v 50Hz |
In the same category
Documentation
Request the manufacturer catalog, installation drawing and confirmed specification with your quotation.
Equipment photo on request
Combination machines
WEISS WBP250 — Combination lathe and milling machine
- Distance between centres — Execution / condition: Item No. 10110302
- 550 mm
- Distance between centres — Execution / condition: Item No. 10110303
- 750 mm
- Swing over bed — Execution / condition: Item No. 10110302
- Φ250 mm
- Swing over bed — Execution / condition: Item No. 10110303
- Φ250 mm
Availability on request
Combination machines
WEISS WBP290F — Combination lathe and milling machine
- Distance between centres
- 750 mm
- Swing over bed
- 290 mm
- Swing over cross slide
- 170 mm
- Spindle bore
- 38 mm
Availability on request
Equipment request
Start with your task.
Describe the product and expected result. Leave unknown parameters blank; we will clarify them together.
- WHITE EAGLE HQ750