Ironworkers
AHYW Q35Y-16
- Punching Pressure
- 55 T
- Max. cutting thickness of steel plates
- 16 mm
- Plate strength
- ≤450 N/mm²
- Angle of Shear
- 7 °
Availability on request
Availability on request
- Punching Pressure
- 60 ton
- Max. cutting thickness of steel plates
- 16 mm
- Plate strength
- ≤450 N/mm²
- Angle of Shear
- 7 °
| Punching Pressure | 60 ton |
|---|---|
| Max. cutting thickness of steel plates | 16 mm |
| Plate strength | ≤450 N/mm² |
| Angle of Shear | 7 ° |
| Single-stroke shearing (thickness × width) | 16×250; 8×400 mm |
| Slide stroke | 80 mm |
| Stroke rate | 11–20 min⁻¹ |
| Throat depth | 300 mm |
| Punching thickness | 18 mm |
| Maximum punching diameter | 25 mm |
| Main motor power | 5.5 kW |
| Overall dimensions (L x W x H) | 1730×820×1900 mm |
| N.W | 1800 kg |
| Round Bar | 45 mm |
| Square Bar | 40×40 mm |
| Equal Angle 90° Shearing | 120×120×12 mm |
| Equal Angle 45° Shearing | 50×50×6 mm |
| T-Bar 90° Shearing | 125×125×12 mm |
| T-Bar 45° Shearing | 60×60×8 mm |
| I-beam | 120×74×5 mm |
| Channel | 120×53×5.5 mm |
In the same category
Documentation
Request the manufacturer catalog, installation drawing and confirmed specification with your quotation.
Ironworkers
AHYW Q35Y-20
- Punching Pressure
- 75 T
- Max. cutting thickness of steel plates
- 20 mm
- Plate strength
- ≤450 N/mm²
- Angle of Shear
- 8 °
Availability on request
Ironworkers
AHYW Q35Y-25
- Punching Pressure
- 110 T
- Max. cutting thickness of steel plates
- 25 mm
- Plate strength
- ≤450 N/mm²
- Angle of Shear
- 8 °
Availability on request
Equipment request
Start with your task.
Describe the product and expected result. Leave unknown parameters blank; we will clarify them together.
- HUAXIA Q35Y-16