Ironworkers
AHYW Q35Y-16
- Punching Pressure
- 55 T
- Max. cutting thickness of steel plates
- 16 mm
- Plate strength
- ≤450 N/mm²
- Angle of Shear
- 7 °
Availability on request
Availability on request
- Punching Pressure
- 250 ton
- Max. cutting thickness of steel plates
- 50 mm
- Plate strength
- ≤450 N/mm²
- Angle of Shear
- 8 °
| Punching Pressure | 250 ton |
|---|---|
| Max. cutting thickness of steel plates | 50 mm |
| Plate strength | ≤450 N/mm² |
| Angle of Shear | 8 ° |
| Single-stroke shearing (thickness × width) | 30×600 mm |
| Slide stroke | 80 mm |
| Stroke rate | 8–12 min⁻¹ |
| Throat depth | 600 mm |
| Punching thickness | 50 mm |
| Maximum punching diameter | 35 mm |
| Main motor power | 32 kW |
| Overall dimensions (L x W x H) | 3000×1150×2600 mm |
| N.W | 12500 kg |
| Round Bar | 80 mm |
| Square Bar | 70×70 mm |
| Equal Angle 90° Shearing | 200×200×20 mm |
| Equal Angle 45° Shearing | 100×100×20 mm |
| T-Bar 90° Shearing | 200×200×20 mm |
| T-Bar 45° Shearing | 100×100×20 mm |
| I-beam | 400×200×16 mm |
| Channel | 400×200×16 mm |
In the same category
Documentation
Request the manufacturer catalog, installation drawing and confirmed specification with your quotation.
Ironworkers
AHYW Q35Y-20
- Punching Pressure
- 75 T
- Max. cutting thickness of steel plates
- 20 mm
- Plate strength
- ≤450 N/mm²
- Angle of Shear
- 8 °
Availability on request
Ironworkers
AHYW Q35Y-25
- Punching Pressure
- 110 T
- Max. cutting thickness of steel plates
- 25 mm
- Plate strength
- ≤450 N/mm²
- Angle of Shear
- 8 °
Availability on request
Equipment request
Start with your task.
Describe the product and expected result. Leave unknown parameters blank; we will clarify them together.
- HUAXIA Q35Y-50