Profile bending rolls
TTMC RBM10
- Manufacturer item number
- 391005
- Dia. of roller shaft / Dia. of shaft
- 30mm
- Packing dimensions
- 50×48×68cm (body); 59×35×86cm (stand)
- Net / gross weight
- 158/175kg
Availability on request
Equipment photo on request
Availability on request
- Maximum section modulus of profiles for bending
- 100
- Profile yield strength
- 250 MPa
- Angle, legs out: maximum cross-section
- 120×12 mm
- Angle, legs out: minimum bending diameter for maximum section
- 2500 mm
| Maximum section modulus of profiles for bending | 100 |
|---|---|
| Profile yield strength | 250 MPa |
| Angle, legs out: maximum cross-section | 120×12 mm |
| Angle, legs out: minimum bending diameter for maximum section | 2500 mm |
| Angle, legs out: minimum cross-section | 40×5 mm |
| Angle, legs out: minimum bending diameter for minimum section | 720 mm |
| Angle, legs in: maximum cross-section | 140×16 mm |
| Angle, legs in: minimum bending diameter for maximum section | 1800 mm |
| Angle, legs in: minimum cross-section | 45×5 mm |
| Angle, legs in: minimum bending diameter for minimum section | 760 mm |
| Flat-along face: maximum cross-section | 250×40 mm |
| Flat-along face: minimum bending diameter | 1200 mm |
| Flat-along edge: maximum cross-section | 120×40 mm |
| Flat-along edge: minimum bending diameter | 1300 mm |
| Round tube: maximum cross-section | 159×5 mm |
| Round tube: minimum bending diameter | 2000 mm |
| Round steel: maximum cross-section | 90 mm |
| Round steel: minimum bending diameter | 1100 mm |
| Square tube: maximum cross-section | 100×10 mm |
| Square tube: minimum bending diameter | 2000 mm |
In the same category
Documentation
Request the manufacturer catalog, installation drawing and confirmed specification with your quotation.
Profile bending rolls
TTMC ERBM10HV
- Manufacturer item number
- 391010
- Dia. of roller shaft / Dia. of shaft
- 30mm
- Packing dimensions
- 95×80×135cm
- Net / gross weight
- 235/285kg
Availability on request
Profile bending rolls
TTMC RBM30
- Manufacturer item number
- 391001
- Dia. of roller shaft / Dia. of shaft
- 30mm
- Packing dimensions
- 93×62×150cm
- Net / gross weight
- 213/248kg
Availability on request
Equipment request
Start with your task.
Describe the product and expected result. Leave unknown parameters blank; we will clarify them together.
- PRIMAPRESS W24S-100